Arc Box New

  • Simple Item 1
  • Simple Item 2
  • Simple Item 3
  • Simple Item 4
  • Simple Item 5
  • Simple Item 6
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Mounting Options.

2/90 OFFERS 17 STANDARD MOUNTING OPTIONS TO MEET A VARIETY OF INSTALLATION APPLICATION FOR OFFICE FURNITURE, VERTICAL SURFACES AND CEILINGS.

Illustrations demonstrate typical view for Standard Modular mounts. Illustrations below depict Standard Modular; Thin Modular and Arc mounts may vary. Custom mounting options are available.

Download Mounting Options Spec Sheet (PDF)

A ADHESIVE – Pressure-sensitive mounting intended for smooth, hard surfaces. Not recommended for selected vinyl wall coverings. Can be used with Silastic® bonding. 100 square inches maximum.
B MAGNETIC – Same as “A” but uses magnetic mounting for steel surfaces. 100 square inches maximum.
C VELCRO – Same as “A” but uses Velcro® for fabric surfaces. 100 square inches maximum.
D SCREW – Screw-on mounting for rough surfaces such as brick and drywall, where “A” is not recommended. Recommended on all wall-mounted signs larger than 100 square inches.
E PIN – A specifically designed pin device for fabric surfaces. Unique one-piece design enables mounting to any fabric surface, including fabrics mounted over hard materials. 100 square inches maximum.
F HOOK – Clear plastic device “hooks over” top of panel. Automatically locates sign 2" from top of panel. Order must specify panel make and thickness.
G DESK – For free-standing applications such as receptionist name signs. Extruded or machined aluminum or acrylic bracket. Fabricated for 1 or 2 sided applications up to 12" in height. One-sided version sits at 30° angle with non-slip bumpers.
H PANEL TOP – For mounting on top surface of panel. Extruded or machined aluminum or acrylic bracket with pressure-sensitive tape. Fabricated for 1 or 2 sided applications up to 12" in height. One-sided version sits at 30° angle.
*I CEILING MOUNT (SUSPENDED CEILING) – Connects to grid system using extruded aluminum 2" brackets. Signs appear to be “floating” below ceiling line. Specify 1/2" or 1" grid system.
*J CEILING MOUNT (HANGING) – General-purpose hanging applications for high or irregular ceilings. Hang lines tie to various points (rafters, beams, duct work, piping, etc.). Customer must supply hang line material.
*K PERPENDICULAR WALL MOUNT – Mounts sign at 90° angle to wall surface. Not available on signs wider than 15".
*L INSIDE OF GLASS MOUNT – Clear acrylic bracket attached to glass with clear pressure-sensitive tape.
*M CEILING MOUNT (HANGING) – Extruded aluminum bracket designed for screw mount. No mounting screws provided.
*N CEILING MOUNT (RIGID POST) – Sign mounts 6", 12", 18" or 24" from ceiling using 1/2" black aluminum rod.
O FLEXIBLE PANEL MOUNT – Under the top cap panel device in black or white fabric. Automatically locates the sign flush with the top of the panel. Order must specify fabric color.
P PANEL AND TILE MOUNT – Aluminum device hooks over the top of panel, under the top cap. Automatically locates sign flush with the top of the panel. Order must specify panel make and thickness.
 R-Saddle-Mount-Thumb R SADDLE – Aluminum device hooks over the top of panel top. Locates sign flush with panel top. Can be one or two sided.

* Not available for Thin Modular, Plaques Plus or Plaques. Mount G and H are also not available for Plaques Plus or Plaques.