2/90 OFFERS 17 STANDARD MOUNTING OPTIONS TO MEET A VARIETY OF INSTALLATION APPLICATION FOR OFFICE FURNITURE, VERTICAL SURFACES AND CEILINGS.
Illustrations demonstrate typical view for Standard Modular mounts. Illustrations below depict Standard Modular; Thin Modular and Arc mounts may vary. Custom mounting options are available.
Download Mounting Options Spec Sheet (PDF)
|A ADHESIVE – Pressure-sensitive mounting is intended for smooth, hard surfaces. Not recommended for selected vinyl wall coverings. Can be used with Silastic® bonding. 100 square inches maximum.|
|B MAGNETIC – Same as “A” but uses magnetic mounting for steel surfaces. 100 square inches maximum.|
|C VELCRO – Same as “A” but uses Velcro® for fabric surfaces. 100 square inches maximum.|
|D SCREW – Screw-on mounting for rough surfaces such as brick and drywall, where “A” is not recommended. Recommended on all wall-mounted signs larger than 100 square inches.|
|E PIN – A specifically designed pin device for fabric surfaces. Unique one-piece design enables mounting to any fabric surface, including fabrics mounted over hard materials. 100 square inches maximum.|
|F HOOK – Clear plastic device “hooks over” top of panel. Automatically locates sign 2" from top of panel. Order must specify panel make and thickness.|
|G DESK – For free-standing applications such as receptionist name signs. Extruded or machined aluminum or acrylic bracket. Fabricated for 1 or 2 sided applications up to 12" in height. One-sided version sits at 30° angle with non-slip bumpers.|
|H PANEL TOP – For mounting on top surface of panel. Extruded or machined aluminum or acrylic bracket with pressure-sensitive tape. Fabricated for 1 or 2 sided applications up to 12" in height. One-sided version sits at 30° angle.|
|*I CEILING MOUNT (SUSPENDED CEILING) – Connects to grid system using 2" extruded aluminum brackets. Signs appear to be “floating” below ceiling line. Specify 1/2" or 1" grid system.|
|*J CEILING MOUNT (HANGING) – General-purpose hanging applications for high or irregular ceilings. Hang lines tie to various points (rafters, beams, duct work, piping, etc.). Customer must supply hang line material.|
|*K PERPENDICULAR WALL MOUNT – Mounts sign at 90° angle to wall surface. Not available on signs wider than 15".|
|*L INSIDE OF GLASS MOUNT – Clear acrylic bracket attached to glass with clear pressure-sensitive tape.|
|*M CEILING MOUNT (HANGING) – Extruded aluminum bracket designed for screw mount. No mounting screws provided.|
|*N CEILING MOUNT (RIGID POST) – Sign mounts 6", 12", 18" or 24" from ceiling using 1/2" black aluminum rod.|
|O FLEXIBLE PANEL MOUNT – Under the top cap panel device in black or white fabric. Automatically locates the sign flush with the top of the panel. Order must specify fabric color.|
|P PANEL AND TILE MOUNT – Aluminum device hooks over the top of panel, under the top cap. Automatically locates sign flush with the top of the panel. Order must specify panel make and thickness.|
|R SADDLE – Aluminum device hooks over the top of panel top. Locates sign flush with panel top. Can be one or two sided.|
* Not available for Thin Modular, Plaques Plus or Plaques. Mount G and H are also not available for Plaques Plus or Plaques.